Western Red Cedar bee hives
Old Castle Farm Hives supplies cedar bee hives and hive parts in the British Standard National size. Hives and boxes come either flat pack or assembled, so a beekeeper can choose between building the hive and receiving it ready to use. Because all of the cedar is 1st quality, none of it has defects, cracks or splits, and hives, boxes and nuc boxes carry a 12 month guarantee.
Why Western Red Cedar
- Naturally resistant to rot, so the hive can be left untreated or painted, as you prefer
- Low density gives good insulation, which helps keep the colony steadier through changes in temperature
- Low shrinkage and good resistance to warping, so the boxes keep their shape and stack evenly
- Lightweight timber, so a full box is easier to lift and handle
Cedar compared with plastic
Wood and plastic hives both house a colony, but they behave differently over time. Cedar has three practical advantages.
First, cedar breathes. Wood is porous, so water vapour from the colony can pass through the walls, while plastic is not porous, so moisture is more likely to condense and form droplets inside the hive.
Second, cedar lasts without treatment, because the timber contains natural oils that resist decay fungi and insects. A cedar hive can therefore stay bare or take paint, and the beekeeper chooses the finish.
Third, cedar can be repaired and replaced one part at a time. Every box, floor, roof and crown board in this range is sold separately, so a worn part never means buying a new hive.
Complete National bee hives
Each complete hive is a full kit, because it includes the roof, brood box, two supers, open mesh floor, crown board, queen excluder and entrance block. The brood box and supers also have metal runners fitted.
Complete National bee hive, Western Red Cedar: this kit takes 11 DN4 brood frames and 22 SN4 super frames, and it also has a wood and wire queen excluder.
Complete 14 x 12 National hive, Western Red Cedar: the brood box is a deep 14 x 12 box, while the two supers are standard National size.
Complete National bee hive, pine: this kit uses untreated pine instead of cedar, and it has a plastic queen excluder.
However, the complete hives do not include frames or foundation. The Frame and Foundation Bundle has 11 DN4 brood frames and 22 SN4 super frames with wired foundation and gimp pins, which is enough for a National hive. The 14 x 12 Hoffman frames fit the 14 x 12 brood box instead.
Boxes, floors and roofs
Single parts let a beekeeper build a hive up or replace a worn one. Most of them are the British Standard National size, but the 14 x 12 brood box is the exception. It is also compatible with standard National supers, floors, roofs and queen excluders.
National brood box: it takes 11 DN4 frames, and it also has metal runners.
14 x 12 deep brood box: it takes 11 Hoffman frames in the 14 x 12 size, and it also has metal runners.
National super box: it takes 11 SN4 frames, while the metal runners come fitted.
National super box, pine: this box is untreated pine, so it matches the pine hive, and the flat pack version comes with nails.
Open mesh floor: it comes assembled, and it also has a slide-out inspection tray, an entrance block and an angled alighting board.
Roof with metal sheet: the roof is solid cedar, and it also has a galvanised metal sheet on top.
Crown board: it is framed plywood with two porter bee escape holes.
Hive Revive bundle: it has a cedar floor, roof and crown board, so one order replaces the worn parts on a National or 14 x 12 hive.
Nuc boxes
Both cedar nuc boxes are complete 6 frame boxes, and each has an open mesh floor, entrance block, crown board and deep roof. Neither includes frames, so the frames need buying separately. If a beekeeper prefers a poly nuc, the Poly Nuc system covers that range.
National nuc box: this box takes six British National frames.
14 x 12 nuc box: this box takes six deep 14 x 12 frames.
Which foundation goes with which box?
Brood boxes take deep frames and foundation, while supers take shallow frames and foundation. Therefore the foundation must match the frame, and the frame must match the depth of the box.
Frame and foundation guide
| National brood box | Fit DN4 brood frames with wired deep foundation. The box takes 11 frames, so one pack of 11 sheets is enough. |
|---|---|
| 14 x 12 deep brood box | Fit 14 x 12 Hoffman frames. However, foundation is not sold for 14 x 12 frames. |
| Super box, extracted honey | Fit SN4 super frames with wired shallow foundation. The sheet has the wire embedded, so the comb holds up in the extractor. |
| Super box, cut comb honey | Fit SN4 super frames with unwired shallow foundation. Because there is no wire, the comb cuts cleanly into sections. |
If a beekeeper wants ready-to-use frames, DN4 brood frames with plastic foundation come fully assembled.
Flat pack or assembled bee hives
Flat pack boxes and hives arrive unsanded with assembly instructions, so they suit beekeepers who want to build the hive themselves.
Assembled boxes and hives arrive sanded smooth, so they are ready to use straight away.
Questions
What is a British Standard National hive?
It is the standard hive size in the UK. The brood box takes 11 DN4 frames and each super takes 11 SN4 frames, so National frames and accessories are made to fit this size.
Which hive should a beginner choose?
A British Standard National hive is the usual starting point in the UK, because frames, boxes and spare parts for the size are easy to find. The complete National bee hive in cedar is a full kit, and the Frame and Foundation Bundle supplies the frames to go with it.
What else does a beginner need besides the hive?
A colony of bees is the main addition, and a beginner also needs protective clothing, a smoker and a hive tool. The Sentinel Pro II suit and the beekeeping smokers are available from the same shop.
Does a hive need a stand?
A stand is not part of a complete hive, so it is sold separately. It lifts the floor off the ground, which helps keep the hive drier and means less bending when the beekeeper inspects the colony. The National hive stand suits the National size.
What is the difference between a National and a 14 x 12 hive?
A standard National brood box takes DN4 frames. The 14 x 12 brood box is larger and takes 14 x 12 frames, while the two supers on a 14 x 12 hive are standard National supers. Because the brood frames differ, the two brood boxes cannot share frames.
If only the floor, roof and crown board need replacing, is there a bundle?
Yes. The Hive Revive bundle supplies a cedar floor, roof and crown board together, and each part is also sold on its own in the list above.
Does the pine hive take the same frames and parts, or is it different?
It takes the same, because it is a British Standard National hive. It uses untreated pine and a plastic queen excluder, and the extra pine super boxes match the supers in the kit.
How many frames does a National hive need?
A National hive needs 11 DN4 brood frames for the brood box and 22 SN4 super frames for two supers. The Frame and Foundation Bundle has exactly that number, but the 14 x 12 hive needs 14 x 12 Hoffman frames in the brood box instead.
If more honey space is needed later, can extra supers be added?
Yes. Extra cedar super boxes and pine super boxes are sold separately, and each one takes 11 SN4 frames. A cedar hive can therefore keep the same timber throughout.
How many supers can a hive take?
There is no set limit, so a hive can take as many supers as the colony can fill and the beekeeper can safely lift. A colony only fills as many boxes as the nectar flow allows, so supers are usually added one at a time. However, a tall stack is top-heavy, so adjustable hive connectors and a National hive stand help keep the boxes steady.
Does a cedar hive need treating or painting?
No, because cedar resists rot naturally, so a hive can stay bare. However, a hive that gets painted needs a water-based exterior paint on the outside only.
The hive
Complete hives, boxes, parts and the frames to fill them.













